Previous Page Table of Contents Next Page


10. Mineral acidity

We have referred to the pH changes of water owing to changes in the content of CO2, in different forms. Increase in free CO2 (H2CO3) cannot make the water pH lower than 4.5, which is the acid point of methyl orange indicator i.e. when you titrate acid (say 1/100 N HCl) against a basic solution (say hard water) the phenolph halein and point is reached at a pH of 8.3, and when you titrate further down the methyl usage and point is reached. The reverse titration with base as titrant would indicate the same and give acidity values. If the pH of a water sample is less than 4.5 this must be caused by a strong mineral acid (of H2SO4 in water on acid sulphate soils in Buguma). Oxidation of pyrites in acid sulphate soils sulfuric acid results:

4 Fe S2 + 15 O2 + 2H202 Fe2(SO4)3 + 2H2SO4

(see also discussion on “acid sulphate soil”).

Soil from marine sediments will have sulfide compounds (cat's clay) and sulfide in such soils would oxidize on exposure to air producing sulfuric acid and water in ponds in cat's clay formation can have a pH of 2 and acid mineral acidity of 350 mg/l (equivalent CaCO3) as observed by Boyd (1979).


Previous Page Top of Page Next Page