All woods derived from trees classified
botanically as Gymnospermae, e.g. Abies
spp., Araucaria spp., Cedrus spp., Chamaecyparis spp., Cupressus
spp., Larix spp., Picea
spp., Pinus spp., Thuja spp., Tsuga spp., etc. These are generally referred to as softwoods.
All woods derived from trees classified
botanically as Angiospermae, e.g. Acer spp., Dipterocarpus
spp., Entandroprhagma spp., Eucalyptus spp., Fagus spp., Populus spp., Quercus spp., Shorea
spp., Swietonia spp., Tectona spp., etc. These are generally referred to
as broadleaves or hardwoods.
Tropical timber is defined in the International Tropical Timber Agreement (1994) as follows “Non-coniferous tropical wood for industrial uses, which grows or is produced in the countries situated between the Tropic of Cancer and the Tropic of Capricorn. The term covers logs, sawnwood, veneer sheets and plywood. Plywood which includes in some measure conifers of tropical origin shall also be covered by the definition.” For the purposes of this questionnaire, tropical sawnwood, veneer sheets and plywood shall also include products produced in non-tropical countries from imported tropical roundwood. Please indicate if statistics provided under "tropical" in this questionnaire may include species or products beyond the scope of this definition.
The volume of
all trees, living or dead, that are felled and removed from the forest, other
wooded land or other felling sites. It
includes natural losses that are recovered (i.e. harvested), removals
during the year of wood felled during an earlier period removals of non-stem
wood such as stumps and branches (where these are harvested) and removal of
trees killed or damaged by natural causes (i.e. natural losses), e.g. fire,
windblown, insects and diseases. It
excludes bark and other non-woody biomass and any wood that is not removed,
e.g. stumps, branches and tree tops (where these are not harvested) and felling
residues (harvesting waste). It is
reported in cubic metres solid volume underbark (i.e. excluding bark).
Where it is measured overbark (i.e. including bark), the volume has to be
adjusted downwards to convert to an underbark estimate.
The solid volume or weight of all production of the products specified below. It includes the production of products that may immediately be consumed in the production of another product (e.g. wood pulp, which may immediately be converted into paper as part of a continuous process). It excludes the production of veneer sheets that are used for plywood production within the same country. It is reported in cubic metres of solid volume in the case of roundwood, sawnwood and wood based panels and metric tonnes in the case of charcoal, pulp and paper products.
Imports (Quantity, Value)
Products imported for domestic consumption or processing shipped into a country. It includes imports for re-export. It excludes "In-transit" shipments. It is reported in cubic metres of solid volume or metric tonnes and values normally include cost, insurance and freight (i.e. CIF).
Exports (Quantity, Value)
Products of domestic origin or manufacture shipped out of the country. It includes re-exports. It excludes "in-transit" shipments. It is reported in cubic metres of solid volume or metric tonnes and values are normally recorded as free-on-board (i.e. FOB).
The names of individual forest products and product aggregates are listed below in the order in which they occur in the tables later on. Separate definitions are not provided for coniferous (C) and non-coniferous (NC) components where the general definition given above applies. Unless indicated otherwise, each forest product category includes both coniferous and non-coniferous components.
1. ROUNDWOOD
1.C Coniferous
1.NC Non-Coniferous
All roundwood felled or otherwise harvested and removed. It comprises all wood obtained from removals, i.e. the quantities removed from forests and from trees outside the forest, including wood recovered from natural, felling and logging losses during the period, calendar year or forest year. It includes all wood removed with or without bark, including wood removed in its round form, or split, roughly squared or in other form (e.g. branches, roots, stumps and burls (where these are harvested) and wood that is roughly shaped or pointed. It is an aggregate comprising wood fuel, including wood for charcoal and industrial roundwood (wood in the rough). It is reported in cubic metres solid volume underbark (i.e. excluding bark).
1.1 WOOD FUEL (INCLUDING WOOD FOR CHARCOAL)
1.1.C Coniferous
1.1.NC Non-Coniferous
Roundwood that will be used as fuel for purposes such as cooking, heating or power production. It includes wood harvested from main stems, branches and other parts of trees (where these are harvested for fuel) and wood that will be used for charcoal production (e.g. in pit kilns and portable ovens). The volume of roundwood used in charcoal production is estimated by using a factor of 6.0 to convert from the weight (mt) of charcoal produced to the solid volume (m3) of roundwood used in production. It also includes wood chips to be used for fuel that are made directly (i.e. in the forest) from roundwood. It excludes wood charcoal. It is reported in cubic metres solid volume underbark (i.e. excluding bark).
1.2 INDUSTRIAL ROUNDWOOD (WOOD IN THE ROUGH)
1.2.C Coniferous
1.2.NC Non-Coniferous
1.2.NC.T of which tropical
All roundwood except wood fuel. In JQ1, it is an aggregate comprising sawlogs and veneer logs; pulpwood, round and split; and other industrial roundwood. It is reported in cubic metres solid volume underbark (i.e. excluding bark). The customs classification systems used by most countries do not allow the division of Industrial Roundwood trade statistics into the different end-use categories that have long been recognized in production statistics (i.e. saw and veneer logs, pulpwood and other industrial roundwood). Thus, these components do not appear in JQ2. Category 1.2.NC.T does not appear in JQ1 as only minimal quantities of tropical industrial roundwood are removed from countries classified as non-tropical (i.e. Australia, China) and all non-coniferous removals in tropical countries fall into this category by definition. It excludes: telephone poles.
1.2.1 SAWLOGS AND VENEER LOGS
1.2.1.C Coniferous
1.2.1.NC Non-Coniferous
Roundwood that will be sawn (or chipped) lengthways for the manufacture of sawnwood or railway sleepers (ties) or used for the production of veneer (mainly by peeling or slicing). It includes roundwood (whether or not it is roughly squared) that will be used for these purposes; shingle bolts and stave bolts; match billets and other special types of roundwood (e.g. burls and roots, etc.) used for veneer production. It is reported in cubic metres solid volume underbark (i.e. excluding bark).
PULPWOOD, ROUND AND SPLIT
1.2.2.C Coniferous
1.2.2.NC Non-Coniferous
Roundwood
that will be used for the production of pulp, particleboard or fibreboard. It
includes: roundwood (with or without
bark) that will be used for these purposes in its round form or as splitwood or
wood chips made directly (i.e. in the forest) from roundwood. It is reported in cubic
metres solid volume underbark (i.e. excluding bark).
1.2.3 OTHER INDUSTRIAL ROUNDWOOD
1.2.3.C Coniferous
1.2.3.NC Non-Coniferous
Industrial roundwood (wood in the rough) other than sawlogs, veneer logs and/or pulpwood. It includes roundwood that will be used for poles, piling, posts, fencing, pitprops tanning, distillation and match blocks, etc. It is reported in cubic metres solid volume underbark (i.e. excluding bark).
2 WOOD CHARCOAL
Wood carbonised by partial combustion or the application of heat from external sources. It includes charcoal used as a fuel or for other uses, e.g. as a reduction agent in metallurgy or as an absorption or filtration medium. It is reported in metric tonnes.
3 CHIPS AND PARTICLES
Wood that has been deliberately reduced to small
pieces during the manufacture of other wood products and is suitable for
pulping, for particle board and fibreboard production, for use as a fuel, or
for other purposes. It excludes wood chips made directly (i.e. in the forest) from roundwood (i.e.
already counted as pulpwood, round and split). It is reported in cubic metres solid volume excluding bark.
4 WOOD RESIDUES
The volume of roundwood that is left over after the production of forest products in the forest processing industry (i.e. forest processing residues) and that has not been reduced to chips or particles. It includes sawmill rejects, slabs, edgings and trimmings, veneer log cores, veneer rejects, sawdust, residues from carpentry and joinery production, etc. It excludes wood chips made either directly (i.e. in the forest) from roundwood or made from residues (i.e. already counted as pulpwood, round and split or wood chips and particles). It is reported in cubic metres solid volume excluding bark.
5 SAWNWOOD
5.C Coniferous
5.NC Non-Coniferous
5.NC.T of which tropical
Wood that has been produced from both domestic and
imported roundwood, either by sawing lengthways or by a profile-chipping
process and that, with a few exceptions, exceeds 5 mm in thickness. It includes planks, beams, joists,
boards, rafters, scantlings, laths, boxboards and "lumber", etc., in
the following forms: unplaned, planed, finger-jointed, etc. It excludes sleepers, wooden flooring,
mouldings (sawnwood continuously
shaped along any of its edges or faces, like tongued, grooved, rebated,
V-jointed, beaded, moulded, rounded or the like) and sawnwood produced by
resawing previously sawn pieces. It is reported in cubic metres solid
volume.
6 WOOD-BASED PANELS
In JQ1 and JQ2, this product
category is an aggregate comprising
veneer sheets, plywood, particle board, and fibreboard. It is reported in cubic metres solid
volume.
6.1 VENEER SHEETS
6.1.C Coniferous
6.1.NC Non-Coniferous
6.1.NC.T of which tropical
Thin sheets of wood of uniform thickness, rotary
cut (i.e. peeled), sliced or sawn. It
includes wood used for the manufacture of laminated construction material,
furniture, veneer containers, etc. It
excludes wood used for plywood production within the same country. It is reported in cubic metres solid
volume.
6.2 PLYWOOD
6.2.C Coniferous
6.2.NC Non-Coniferous
6.2.NC.T of which tropical
A panel consisting of an assembly of veneer sheets
bonded together with the direction of the grain in alternate plies generally at
right angles. The veneer sheets are usually placed symmetrically on both sides
of a central ply or core that may itself be made from a veneer sheet or another
material. It includes veneer plywood (plywood manufactured by
bonding together more than two veneer sheets, where the grain of alternate
veneer sheets is crossed, generally at right angles); core plywood or blockboard (plywood with a solid core
(i.e. the central layer, generally thicker than the other plies) that consists
of narrow boards, blocks or strips of wood placed side by side, which may or
may not be glued together); cellular
board (plywood with a core of cellular construction); and composite plywood (plywood with the core
or certain layers made of material other than solid wood or veneers). It excludes laminated construction
materials (e.g. glulam), where the grain of the veneer sheets generally runs in
the same direction. It is
reported in cubic metres solid volume. Non-coniferous (tropical) plywood is
defined as having at least one face sheet of non-coniferous (tropical)
wood. If substantial quantities of
mixed (coniferous/non-coniferous) plywood are included in reported statistics,
an explanatory note should be provided.
6.3 PARTICLE BOARD (INCLUDING ORIENTED STRANDBOARD (OSB))
A
panel manufactured from small pieces of wood or other ligno-cellulosic
materials (e.g. chips, flakes, splinters, strands, shreds, shives, etc.) bonded
together by the use of an organic binder together with one or more of the
following agents: heat, pressure, humidity, a catalyst, etc. The particle board
category is an aggregate category. It
includes particle board; oriented strandboard (OSB) and flaxboard. It excludes wood wool and other
particle boards bonded together with inorganic binders. It is reported in cubic metres solid
volume.
6.3.1 ORIENTED STRANDBOARD (OSB)
A structural board in which layers of narrow wafers are layered alternately at right angles in order to give the board greater elastomechanical properties. The wafers, which resemble small pieces of veneer, are coated with e.g. waterproof phenolic resin glue, interleaved together in mats and then bonded together under heat and pressure. The resulting product is a solid, uniform building panel having high strength and water resistance. It includes: waferboard and oriented strandboard (OSB). It is reported in cubic metres solid volume.
6.4 FIBREBOARD
A
panel manufactured from fibres of wood or other ligno-cellulosic materials with
the primary bond deriving from the felting of the fibres and their inherent
adhesive properties (although bonding materials and/or additives may be added
in the manufacturing process). It
includes fibreboard panels that are flat-pressed and moulded fibreboard
products. In JQ1 and JQ2, it is an
aggregate comprising hardboard; medium density fibreboard (MDF); and
insulating board. It is reported
in cubic metres solid volume.
6.4.1 HARDBOARD
Fibreboard of a density exceeding 0.8 g/cm3. It excludes similar products made from pieces of wood, wood flou r or other ligno-cellulosic material where additional binders are required to make the panel; and panels made of gypsum or other mineral material. It is reported in cubic metres solid volume.
6.4.2 MEDIUM DENSITY FIBREBOARD (MDF)
Fibreboard of a density exceeding 0.5 g/cm3 but not exceeding 0.8 g/cm3. It is reported in cubic metres solid volume.
6.4.3 INSULATING BOARD
Fibreboard of a density not exceeding 0.5 g/cm3. It is reported in cubic metres solid volume.
7 WOOD PULP
Fibrous material prepared from pulpwood, wood chips, particles or residues by mechanical and/or chemical process for further manufacture into paper, paperboard, fibreboard or other cellulose products. In JQ1 and JQ2, it is an aggregate comprising mechanical wood pulp; semi-chemical wood pulp; chemical wood pulp; and dissolving wood pulp. It is reported in metric tonnes air-dry weight (i.e. with a 10% moisture content).
7.1 MECHANICAL WOOD PULP
Wood
pulp obtained by grinding or milling pulpwood or residues into fibres, or
through refining chips or particles. Also called groundwood pulp and refiner
pulp, it may be bleached or unbleached. It
includes chemi-mechanical and thermo-mechanical pulp. It excludes exploded and defibrillated pulp. It is reported in metric tonnes air-dry
weight (i.e. with 10% moisture content).
7.2 SEMI-CHEMICAL
WOOD PULP
Wood
pulp obtained by subjecting pulpwood, wood chips, particles or residues to a series of mechanical and chemical
treatments, none of which alone is sufficient to make the fibres separate
readily. It may be bleached or unbleached. It
includes semi-chemical wood pulp; chemi-groundwood pulp; and
chemi-mechanical wood pulp etc. (named in the order and importance of the
treatment during the manufacturing process). It is reported in metric tonnes air-dry weight (i.e. with 10%
moisture content).
7.3 CHEMICAL WOOD PULP
Wood
pulp obtained by subjecting pulpwood, wood chips, particles or residues to a series of chemical treatments. It includes sulphate (kraft) wood pulp;
soda wood pulp and sulphite wood pulp. It may be bleached, semi-bleached or
unbleached. It excludes dissolving
grades of wood pulp. It is
reported in metric tonnes air-dry weight (i.e. with 10% moisture content). If available, statistics for the following four
component pulps are also requested: unbleached sulphite pulp; bleached sulphite
pulp; unbleached sulphate pulp; and bleached sulphate pulp.
7.3.1 SULPHATE UNBLEACHED PULP
7.3.2 SULPHATE BLEACHED PULP
Wood pulp obtained by mechanically reducing pulpwood,
wood chips, particles or residues to small
pieces that are subsequently cooked in a pressure vessel in the presence of
sodium hydroxide cooking liquor (soda pulp) or a mixture of sodium hydroxide
and sodium sulphite cooking liquor (sulphate pulp). It excludes dissolving grades of wood pulp. It is reported in metric tonnes air-dry
weight (i.e. with a 10% moisture content). Data
for two classes (bleached, including semi-bleached, and unbleached) are
requested separately.
7.3.3 SULPHITE UNBLEACHED PULP
7.3.4 SULPHITE BLEACHED PULP
Wood pulp obtained by mechanically reducing pulpwood,
wood chips, particles or residues to small
pieces that are subsequently cooked in a pressure vessel in the presence of a
bisulphite cooking liquor. Bisulphites such as ammonium, calcium, magnesium and
sodium are commonly used in this process. It
excludes dissolving grades of wood pulp. It is reported in metric tonnes air-dry weight (i.e. with a 10%
moisture content). Data for two classes
(bleached, including semi-bleached, and unbleached) are requested separately.
7.4 DISSOLVING GRADES
Chemical pulp (sulphate, soda or sulphite) made
from wood of special quality, with a very high alpha-cellulose content (usually
90 percent and over). This type of pulp is always bleached and is readily
adaptable for uses other than papermaking. It is used principally as a source
of cellulose in the manufacture of products such as synthetic fibres, cellulose
plastic materials, lacquers and explosives. It is reported in metric tonnes air-dry weight (i.e. with 10%
moisture content).
8 OTHER PULPS
Pulp manufactured from waste paper or from fibrous vegetable materials other than wood and used for the manufacture of paper, paperboard and fibreboard. In JQ1 and JQ2, it is an aggregate comprising pulp from fibres other than wood and recovered fibre pulp. It is reported in metric tonnes air-dry weight (i.e. with 10% moisture content).
8.1 PULP FROM FIBRES OTHER THAN WOOD
Pulp manufactured from fibrous vegetable materials
other than wood and used for the manufacture of paper, paperboard and
fibreboard. It excludes pulp made
from recovered paper. It includes
pulps made from: straw; bamboo; bagasse; esparto; other reeds or grasses;
cotton fibres; flax; hemp; rags; and other textile wastes. It is reported in metric tonnes air-dry
weight (i.e. with 10% moisture content).
8.2 RECOVERED FIBRE PULP
Pulp manufactured from recovered paper or
paperboard and used for the manufacture of paper, paperboard and fibreboard. It excludes pulp made from straw;
bamboo; bagasse; esparto; other reeds or grasses; cotton fibres; flax; hemp;
rags; and other textile wastes. It
is reported in metric tonnes air-dry weight (i.e. with 10% moisture
content).
9 RECOVERED PAPER
Waste and scraps of paper or paperboard that have been collected for re-use as a raw material for the manufacture of paper and paperboard. It includes paper and paperboard that has been used for its original purpose and residues from paper and paperboard production. It is reported in metric tonnes.
10 PAPER AND PAPERBOARD
The paper and paperboard category is an aggregate category. In the production and trade statistics, it represents the sum of: graphic papers; sanitary and household papers; packaging materials and other paper and paperboard. Products in this category are generally manufactured in strips or rolls of a width exceeding 15 cm (36 cm for HS 48.13 and 48.19) or in rectangular sheets with one side exceeding 36 cm and the other exceeding 15 cm in the unfolded state. It excludes manufactured paper products such as boxes, cartons, books and magazines, etc. It is reported in metric tonnes.
10.1 Graphic papers
The graphic papers category is an aggregate category. In the production and trade statistics, it represents the sum of: newsprint; uncoated mechanical; uncoated woodfree and coated papers. Products in this category are generally manufactured in strips or rolls of a width exceeding 15 cm (36 cm for HS 48.13 and 48.19) or in rectangular sheets with one side exceeding 36 cm and the other exceeding 15 cm in the unfolded state. It excludes manufactured paper products such as books and magazines, etc. It is reported in metric tonnes.
10.1.1 Newsprint
Paper mainly used for printing newspapers. It is made largely from mechanical pulp and/or waste paper, with or without a small amount of filler. Weights usually range from 40 to 52g/m2 but can be as high as 65g/m2. Newsprint is machine finished or slightly calendered, white or slightly coloured and is used in reels for letterpress, offset or flexo printing. It is reported in metric tonnes.
10.1.2 Uncoated mechanical
Paper suitable for printing or other graphic purposes where less than 90% of the fibre furnish consists of chemical pulp fibres. This grade is also known as groundwood or wood-containing paper and magazine paper, such as heavily filled supercalendered paper for consumer magazines printed by the rotogravure and offset methods. It excludes: Wallpaper base. It is reported in metric tonnes.
10.1.3 Uncoated woodfree
Paper suitable for printing or other
graphic purposes, where at least 90% of the fibre furnish consists of chemical
pulp fibres. Uncoated woodfree paper can be made from a variety or furnishes,
with variable levels of mineral filler and a range of finishing processes such
as sizing, calendering, machine glazing and watermarking. This grade includes most
office papers, such as business forms, copier, computer, stationery and book
papers. Pigmented and size press “coated” papers (coating less than 5g per
side) are covered by this heading. It
excludes: Wallpaper base. It is
reported in metric tonnes.
10.1.4 Coated papers
All paper suitable for printing or other graphic purposes and coated on one or both sides with carbon or minerals such as china clay (kaolin), calcium carbonate, etc. Coating may be by a variety of methods, both on-machine and off-machine, and may be supplemented by supercalendering. It includes: Raw carbon and self-copy paper in rolls or sheets. It excludes: Other copying and transfer papers. It is reported in metric tonnes.
10.2 Sanitary and household papers
This covers the stock of a wide range of tissue and
other hygienic papers for use in households or commercial and industrial
premises. Examples are toilet paper and facial tissues, kitchen towels, hand towels and industrial wipes. Some tissue is also
used in the manufacture of baby napkins, sanitary towels, etc.
The parent reel stock is made from virgin pulp or recovered fibre or mixtures of these. Final products cut to size or in rolls not exceeding 36cm are excluded here. It is reported in metric tonnes.
10.3 Packaging materials
Paper or paperboard mainly used for wrapping and packaging purposes. It excludes: Unbleached kraft paper and paperboard that are not Sack kraft paper or Kraftliner and weighing more than 150 g/m˛ but less than 225 g/m˛; felt paper and paperboard; Tracing papers; not further processed uncoated paper weighing 225 g/m˛ or more. It is reported in metric tonnes.
10.3.1 Case materials
Papers and boards mainly used in the manufacture of corrugated board. They are made from any combination of virgin and recovered fibres and can be bleached, unbleached or mottled. It includes: kraftliner, testliner, semi-chemical fluting, and waste-based fluting (Wellenstoff). It is reported in metric tonnes.
10.3.2 Folding boxboard
Often referred to as Cartonboard, it may be single or multiply, coated or uncoated. It is made from virgin and/or recovered fibres, and has good folding properties, stiffness and scoring ability. It is mainly used in cartons for consumer products such as frozen food and for liquid containers. It includes: paper and paperboard covered or coated with plastics (excluding adhesives); coated Multi-ply not uniformly bleached throughout the mass. It is reported in metric tonnes.
10.3.3 Wrapping papers
Wrappings (up to 150 g/m2): Papers whose main use is wrapping or packaging made from any combination of virgin or recovered fibres, bleached or unbleached. They may be subject to various finishing and/or marking processes. It includes: sack kraft, other wrapping krafts, sulphite and greaseproof papers as well as coated paper and paperboard not uniformly bleached throughout the mass, except Multi-ply. It excludes: Tracing papers. It is reported in metric tonnes.
10.3.4 Other papers mainly for packaging
This category embraces all papers and boards mainly for packaging purposes other than those listed above. Most are produced from recovered fibres, e.g. greyboards, and go for conversion, which in some cases may be for end-uses other than packaging. It includes: Composite, not coated, paper and paper board of flat layers stuck together. It is reported in metric tonnes.
10.4 Other paper and paperboard N.E.S. (nOT elseWhere SPECIFIED)
Other papers and boards for industrial and special purposes. This category includes cigarette papers and stock of filter papers, as well as gypsum liners and special papers for waxing, insulating, roofing, asphalting, and other specific applications or treatments. It excludes: All composite, not coated, paper and paper board of flat layers stuck together; coated paper and paperboard not uniformly bleached throughout the mass; paper and paperboard covered or coated with plastics (excluding adhesives). It includes: wallpaper base; Unbleached kraft paper and paperboard that are no Sack kraft paper or Kraftliner and weighing more than 150 g/m˛ but less than 225 g/m˛; felt paper and paperboard; Tracing papers; not further processed uncoated paper weighing 225 g/m˛ or more. Raw copying and transfer papers, in rolls or sheets except carbon or self-copy paper. It is reported in metric tonnes.
SECONDARY PROCESSED WOOD AND PAPER
PRODUCTS
11 SecondarY Wood Products
11.1 Further Processed Sawnwood
11.1.C Coniferous
11.1.NC Non-Coniferous
11.1.NC.T of
which tropical
Wood sawn or chipped lengthwise (including strips and
friezes for parquet flooring, not assembled) and continuously shaped (tongued, grooved, rebated, V-jointed,
beaded, moulded, rounded or the like) along any of its edges or faces, whether
or not planed, sanded or finger jointed. It
excludes: sawn or chipped wood with further treatment of edges and/or faces
other than planing, or sanding.
11.2 Wooden
wrapping and packaging Material
Packing cases, boxes, crates, drums and similar
packings, of wood; cable-drums of wood; pallets, box pallets and other load
boards, of wood; pallet collars of wood. Casks, barrels, vats, tubs and other
coopers' products and parts thereof, of wood, including staves.
11.3 Builder’s
joinery and carpentry of wood
Including windows and doors and coverings
thereof as well as cellular wood panels, assembled parquet panels, shingles and
shakes.
11.4 Wooden
furniture
Seats with wooden frames as wooden camping and garden
seats etc. and parts thereof. Except:
seats convertible into beds, swivel seats, medical seats.
Wooden furniture other than seats as of a kind used in
offices, in the kitchen, bedrooms and elsewhere, as well as parts of all these.
11.5 Prefabricated buildings
11.5.1 Prefabricated buildings preponderantly made of wood
E.g.: Log cabins, houses prefabricated from particle board.
12 SECONDARY
Paper products
It excludes paper in
rolls and sheets cut in the formats specified in JQ2. It includes all articles
of paper ready for use.
12.1 Composite paper and paperboard
Composite paper and paperboard (made by sticking flat
layers of paper or paperboard together with an adhesive), not surface-coated or
impregnated, whether or not internally reinforced, in rolls or sheets
12.2 Special coated paper and pulp products
Paper, paperboard, cellulose wadding and webs of
cellulose fibres, coated, impregnated, covered, surface-coloured,
surface-decorated or printed, in rolls or sheets. It excludes: Composite paper and paperboard (made by sticking flat
layers of paper or paperboard together with an adhesive), not surface-coated or
impregnated, but possibly laminated internally with bitumen, tar or asphalt, in
rolls or sheets.
12.3 Carbon paper and copying paper, ready for use
Carbon paper, self-copy paper and other copying or
transfer, duplicator stencils and offset plates, of paper, whether or not put
up in boxes. It excludes: Raw
carbon, self-copy and other copying or transfer papers in paper in rolls or
sheets.
12.4 Household and sanitary paper
Products ready for use: toilet paper and similar paper,
cellulose wadding or webs of cellulose fibres, of a kind used for household or
sanitary purposes, in rolls of a width not exceeding 36 cm, or cut to
size or shape. It includes: e. g.
handkerchiefs, cleansing tissues, towels, tablecloths, serviettes, napkins for
babies, tampons, bed sheets and similar household, sanitary or hospital
articles, articles of apparel and clothing accessories, of paper pulp, paper,
cellulose wadding or webs of cellulose fibres. It excludes: sanitary paper produced stock.
12.5 PACKAGING CARTONS, BOXES
ETC.
Cartons, boxes, cases, bags and other packing
containers, of paper, paperboard, cellulose wadding or webs of cellulose
fibres; box files, letter trays, and similar articles, of paper or paperboard
of a kind used in offices, shops or the like.
12.6 Other
articles of paper and paperboard, ready for use
Products ready for use: e.g. wallpaper and similar wall coverings; window transparencies of paper; floor coverings on a base of paper or of paperboard, whether or not cut to size; all office material like for correspondence, document storage as well as albums, labels of all kinds, bobbins, spools, cops and similar supports of paper pulp, paper or paperboard (whether or not perforated or hardened); all other paper, paperboard, cellulose wadding and webs of cellulose fibres, cut to size or shape; other articles of paper pulp, paper, paperboard, cellulose wadding or webs of cellulose fibres.
12.6.1 Filter paper and paperboard, ready for use
12.6.2 Printing and writing paper, ready for use
For example: strips or rolls for office machines,
continuous forms
12.6.3 Articles, moulded or pressed from pulp
For example: packagings for eggs
12.7 Printed articles
12.7.1 Printed books
Printed books, brochures, leaflets and similar printed
matter, whether or not in single sheets
12.7.2 Newspapers
Newspapers, journals and periodicals, whether or not
illustrated or containing advertising material
12.7.3 Other printed articles
Children's picture, drawing or colouring books; music,
printed or in manuscript, whether or not bound or illustrated; maps and
hydrographic or similar charts of all kinds, including atlases, wall maps,
topographical plans and globes, printed; plans and drawings for architectural,
engineering, industrial, commercial, topographical or similar purposes, being
originals drawn by hand; hand-written texts; photographic reproductions on
sensitised paper and carbon copies of the foregoing; unused postage, revenue or
similar stamps of current or new issue in the country to which they are
destined; stamp-impressed paper; banknotes; cheque forms; stock, share or bond
certificates and similar documents of title; transfers (decalcomania); printed
or illustrated postcards; printed cards bearing personal greetings, messages or
announcements, whether or not illustrated, with or without envelopes or trimmings;
calendars of any kind, printed, including calendar blocks; other printed
matter, including printed pictures and photographs.
Unit |
Metric Equivalents |
1 inch |
= 25.4 millimetres |
1 square foot |
= 0.0929 square metre |
1 cubic foot |
= 0.02832 cubic metre |
1 short ton |
= 0.9072 metric ton |
1 long ton |
= 1.016 metric ton |
Forest Products Measures
Product and Unit |
Cubic Metres |
Cubic Feet |
1000 Board Feet |
Standard (Petrograd) |
ROUNDWOOD |
0.03605 |
1.273 |
||
1 hoppus
cubic foot |
1.8027 |
63.66 |
||
1 ton of 5
hoppus cubic feet |
||||
1 cunit |
2.83 |
100 |
||
1 cord1 |
3.625 |
128 |
||
1 stere1 |
1 |
35.315 |
||
1 fathom1 |
6.1164 |
216 |
||
SAWNWOOD |
||||
1 standard (Petrograd) |
4.672 |
165 |
1.98 |
1 |
1 000 board/super feet |
2.36 |
83.33 |
1 |
0.505 |
1 ton of 50 cubic feet |
1.416 |
50 |
0.6 |
0.303 |
WOOD-BASED PANELS |
|
|||
1 000 square metres (1 millimetre thickness) |
1 |
35.315 |
0.4238 |
|
1 000 square
feet (1/8 inch thickness) |
0.295 |
10.417 |
0.125 |
|
1 Stacked volume |
Approximate Equivalents for Forest Measures
Product and Unit |
Cubic Metres |
Cubic Feet |
||
Solid volume
without bark |
||||
SAWLOGS AND
VENEER LOGS |
||||
1 000 board/super feet |
4.53 |
160 |
||
PULPWOOD
ROUND AND SPLIT |
|
|||
1 stere |
0.72 |
25.4 |
||
1 cord |
2.55 |
90 |
||
WOOD FUEL |
||||
1 stere |
0.65 |
23 |
||
1 cord |
2.12 |
74.9 |
||
1 000 stacked cubic feet |
18.41 |
650 |
Weight and Volume
Product |
Kg/CUM |
CUM/MT |
||||
G |
C |
NC |
G |
C |
NC |
|
WOOD FUEL,
INCLUDING WOOD FOR CHARCOAL |
725 |
625 |
750 |
1.38 |
1.60 |
1.33 |
WOOD CHARCOAL |
167 |
|||||
SAWLOGS AND
VENEER LOGS |
||||||
Tropical |
730 |
1.37 |
||||
Other |
700 |
800 |
1.43 |
1.25 |
||
PULPWOOD, ROUND AND SPLIT |
675 |
650 |
750 |
1.48 |
1.54 |
1.33 |
OTHER INDUSTRIAL ROUNDWOOD |
750 |
700 |
800 |
1.33 |
1.43 |
1.25 |
SAWNWOOD |
550 |
700 |
1.82 |
1.43 |
||
VENEER SHEETS |
750 |
1.33 |
||||
PLYWOOD |
650 |
1.54 |
||||
PARTICLE BOARD |
650 |
1.54 |
||||
HARDBOARD |
950 |
1.053 |
||||
MEDIUM DENSITY FIBREBOARD (MDF) |
2 |
|||||
INSULATING
BOARD |
250 |
4 |
Note: G =
general; C = coniferous; NC = non-coniferous