Argyropoulos, G. A., 1991. Schleifen plattenförmiger Werkstücke, Kassel.
Astell, A. S., 1981. The primary conversion of coconut stems into sawn timber. Working Document PHI/71/523. Philippines, FAO/UNDP.
Brion, H., 1984. Demonstration of coconut wood utilization in low cost housing UNIDO, SI/Phi/83/801.
Desch, H. E.,1981. Timber, its structure, properties and utilization. 6th rev. ed. Mac Millan Press Ltd., London, 410 pp.
Ettelt, B., 1987. Sägen, Fräsen, Hobeln, Bohren, Stuttgart.
FAO, 1985. Coconut wood. Processing and use. FAO Forestry Paper 57, Rome, 58 pp.
Fink, D., Heuer, M., 1991. Spanende Bearbeitung von Kokospalmenholz, Fachhochschule Rosenheim, unpublished.
Frühwald, A., Peek, R. D. and Schulte, M., 1992. Utilization of Coconut timber from North Sulawesi, Indonesia. GTZ, Hamburg, 352 pp.
Hildebrand & Söhne, 1979. Handbuch fur Holztrocknung. Stuttgart.
Jensen, P., 1981. Skidding bar. Proceedings Coconut Wood - 1979, Manila-Zamboanga: 67 – 75.
Jensen, P., 1981. Machine costs for tractors, timber jacks and equipment. Proceedings Coconut Wood - 1979, Manila-Zamboanga: 197 – 206.
Jensen, P., 1981. Recovery in sawn timber from cocos nucifera logs. Proceedings Coconut Wood - 1979, Manila-Zamboanga: 88 – 90.
Jensen, P., 1981. Technical information on sawmills. Proceedings Coconut Wood 1979, Manila-Zar boanga: 90 – 97.
Jensen, P., Killmann, W., 1981. Utilization of coconut palm wood (Cocos nucifera L.) Proceedings Coconut Wood - 1979, Manila-Zamboanga: 75 – 79.
Jensen, P., Killmann, W., 1981. Production costs of sawn coconut timber. Proceedings Coconut Wood - 1979, Manila-Zamboanga: 207 – 240.
Juson, R. A., 1983. Machining of coconut wood. Third PCARRD SMARC coordinated review and evaluation of ongoing and completed research projects. Kabacan, Cotabato, Philippines.
Juson, R. A., 1984. The Production of Coconut Lumber Sawing and Sawing Facilities. Philippine Coconut Authority, Zamboanga Research Centre Subject, Handout No. 2A (L).
Juson, R. A., 1984. Layout and Yard Facilities for a Permanent Cocowood Sawmill. Philippine Coconut Authority, Zamboanga Research Centre. Handout No. 2B (L).
Killmann, W., 1983. Some physical properties of the coconut palm stem. Wood Science and Technology Journal 17: 167 – 85.
Killmann, W., 1988. Howto process coconut palm wood. Vieweg, Braunschweig, 76 p.
Killmann, W., Wong, W. C. and Khozirah, S., 1989. Utilization of palm stems and leaves. Bibliography, 1182 entries. Research Pamphlet no. 103, FRIM, Kepong.
Kininmonth, J. A., 1979. Some physical properties of coconut wood. Proceedings Coconut Wood - 1979, Manila-Zamboanga: 141 – 49.
Leitz (Editor), 1992. Maschinenwerkzeuge fur die Holzbearbeitung, Landsberg.
Lockyear, Ross, 1983. Coconut Timber Utilization Manual. Prepared for the Republic of Kiribati. New Zealand Bilateral Aid Programme.
Meier, J., 1991. Untersuchungen zum Trocknungsverhalten von Kokospalmenholz. Diploma Thesis, University Hamburg, 99 pp., unpubl.
Nutsch, Wolfgang, 1983. Handbuch der Konstruktion, Stuttgart.
Palomar, R. N., 1980. Charcoal making. PCA-Zamboanga Research Centre. Unpublished.
Palomar, R. ISI., 1986. Preservation of sawn coconut timber by boron diffusion treatment. CORDII(I): 12 – 35.
Philippine Coconut Authority, 1977. Preparation and treatment of coconut stem for fencing. Coconut Wood Utilization Division, Zamboanga Research Centre Report.
Quinones, D. G., et al.,1983. Backyard Lumbering of Coconut Trunks with Two-Man Rip Saw. FPRDI Journal XII, 1 and 2, Philippines, 7 – 15.
Rossmann,S., 1984. Palmwood-Aesthetic Value and Design, in: Palmwood News 1/94, Eschborn
Schulte, M, 1991. Vergleich verschiedener Verfahren zur Sortierung von Kokospalmenholz. Diploma Thesis, University Hamburg, 154 pp, unpubl.
Schulte, M.,1992. Sortierung von Kokospalmenholz mit Hilfe des Finnograder. BFH Hamburg, 20 pp, unpubl.
Sherlock, F. E., 1991. Machine Woodworking Technology, Hertford.
Sulc, V. K., 1981. Coconut wood lamination. Proceedings Coconut Wood - 1979, Manila-Zamboanga: 156 – 66.
Sulc, V. K., 1983, 1. Draft report on grading rules for coconut palm sawn wood. Regional Coconut Wood Training Programme (RAS/81/110). Zamboanga, Philip-pines (unpublished).
Sulc, V. K., 1983,2. Draft report on grading of coconut palm sawn wood. Regional Coconut Wood Training Programme (RAS/81/110). Zamboanga, Phililppines (unpublished).
Sulc,V. K., 1983,3. Draft Report on mechanical properties of coconut palm wood. Regional Coconut Wood Training Programme (RAS/81/110) FAO/UNIDO,Zamboanga, Philippines (unpublished).
Sulc, V. K., 1984,1. Drying sawn coconut palm wood. Technical report No. 2, RAS/81/110/COIV12andTCP/RAS/4401(T)UNIDO/FAO,Zamboanga, Philippines (unpublished).
Sulc, V. K., 1984, 2. Coconut palm wood utilization. FAO Regional Coconut Wood Training Programme (RAS/81/100). Zamboanga, Philippines (unpublished).
USDA. Lake States Aspen Report No. 5.
Willeitner, H., Liese.W., 1992. Wood protection in tropical countries. GTZ, Eschborn, 228 pp.
