| Commodity: |
Corn / Maize |
| Traits: |
Glyphosate tolerance,Glufosinate tolerance |
| Name of product applicant: |
SYNGENTA |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
28/09/2016 |
| Scope of authorization: |
Food |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
Based on the risk assessment, it can be concluded that the event shows the same risks as its conventional counterpart. Therefore the National Technical Biosafety Committee for GMO use exclusively in Health and human consumption (CTNSalud) recommends its authorization.
|
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Ministerio de salud y proteccion social
Contact person name: Daniel Rubio
Website:
Physical full address: Carrera 13 No. 32- 76 piso 12, Bogotá
Phone number: 330 5000 ext 1256
Fax number:
Country introduction: The 4525 decree of 2005, established the Ministry of Health and Social Protection as the competent authority for GMO for health and food purposes and creates the National Biosafety Technical Committee for GMO's used in health and food purposes (CTNSalud).
The CTNSalud is composed by the Ministry of Health and Social Protection, the National Food and Drug Surveillance Institute (INVIMA) and the Technology and Innovation Administrative Department (COLCIENCIAS). This committee is responsible for the assesment of risk assessments; to inquire for any additional information; assessment of any measurements in accordance to the Cartagena Protocol; and the recommendation for the authorization of GMO for health or food purposes. Useful links
Relevant documents
Stacked events:
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant:
| Name of product applicant: |
Syngenta Agro, S.A. de C.V. |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
14/04/2015 |
| Scope of authorization: |
Food |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
UI OECD: MON-ØØØ21-9 x ACS-ZMØØ3-2 During the risk assessment of this GMO based on existing knowledge to date, no toxic or allergic effects neither substantial nutritional changes are observed. The event is as safe as its conventional counterpart. For more detail please find attached the risk assessment summary in this page. |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): CIBIOGEM
Contact person name: Dra. Consuelo López López
Website:
Physical full address: San Borja #938, Col. Del Valle • Del. Benito Juárez C.P. 03100, México, D.F.
Phone number: +52 (55) 53227700
Fax number:
Country introduction: México ha buscado garantizar la inocuidad de los productos biotecnológicos para el uso y consumo de su población.
Desde 1984 el artículo 282 bis 1 de la Ley General de Salud, contempló que la Secretaría de Salud debería regular aquellos productos biotecnológicos, o sus derivados, destinados al uso o consumo humano.
En un inicio, con fundamento en este artículo, la Secretaria de Salud evaluó la inocuidad alimentaria de productos biotecnológicos, para su comercialización con fines de uso o consumo humano. A partir de 2005, con la entrada en vigor de la Ley de Bioseguridad de Organismos Genéticamente Modificados (LBOGM), se realizó la adecuación de la regulación para dar lugar a la Autorización que es el acto administrativo mediante el cual la Secretaría de Salud, a través de la Comisión Federal para la Protección contra Riesgos Sanitarios (COFEPRIS), autoriza Organismos Genéticamente Modificados (OGMs), a efecto de que se pueda realizar su comercialización, así como su utilización con finalidades de Salud Pública o de Biorremediación.
Las facultades que corresponden a la Secretaría de Salud se estipulan en el artículo 16 de la LBOGM y lo relativo a la Autorizaciones se describe en los artículos 91 al 98 de dicha Ley.
Quienes pretendan obtener una Autorización para Comercialización e Importación de OGMs deben presentar ante COFEPRIS, una solicitud por escrito acompañada de la información a que se refiere los artículos 23 al 32 del Reglamento de la Ley de Bioseguridad de OGMs.
http://www.conacyt.gob.mx/cibiogem/images/cibiogem/normatividad/vigente/LBOGM.pdf
http://www.conacyt.gob.mx/cibiogem/images/cibiogem/normatividad/vigente/Reg_LBOGM.pdf
Courtesy translation
Mexico has sought to guarantee the safety of biotechnological products the use and consumption of its population. Since 1984, article 282 bis 1 from the General Law of Health, considered that the Secretary of Health should regulate those biotechnological products, or their derivatives, intended for food and feed use. Initially, the Secretary of Health evaluated the food safety of biotechnological products, based on this article, for commercialization with purposes of food, feed and processing. Subsequently in 2005, with the entry into force of the Law on Biosafety of Genetically Modified Organisms (LBOGM), the regulation was adapted to give rise to the Authorization, which is the administrative act through which the Secretary of Health, by means of the Federal Commission for the Protection Against Sanitary Risks (COFEPRIS), authorizes Genetically Modified Organisms (GMOs), to their commercialization, as well as their use for purposes of public health or bioremediation.
The faculties that correspond to the Secretary of Health are stipulated in Article 16 of the LBOGM and what is related to the Authorizations is described in Articles 91 to 98 of this Law. Those who seek to obtain an Authorization for GMOs merchandising and importation, must present to COFEPRIS, a written request accompanied by the information referred into articles 23 to 32 of the Regulation of the Law on Biosafety of Genetically Modified Organisms.
http://www.conacyt.gob.mx/cibiogem/images/cibiogem/normatividad/vigente/LBOGM.pdf
http://www.conacyt.gob.mx/cibiogem/images/cibiogem/normatividad/vigente/Reg_LBOGM.pdf Useful links
Relevant documents
Stacked events:
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant:
| Name of product applicant: |
Syngenta Philippines |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
09/12/2014 |
| Scope of authorization: |
Food and feed |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
|
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Bureau of Plant Industry
Contact person name: Geronima P. Eusebio
Website:
Physical full address: San Andres St., Malate, Manila
Phone number: 632 404 0409 loc 203
Fax number:
Country introduction: In 1987, scientists from the University of the Philippines Los Banos (UPLB) and the International Rice Research Institute (IRRI), the Quarantine Officer of the Bureau of Plant Industry (BPI), and the Director for Crops of the Philippine Council for Agriculture, Forestry and Natural Resources Research and Development (PCARRD), recognizing the potential harm of the introduction of exotic species and genetic engineering, formed a committee and formulated the biosafety protocols and guidelines for genetic engineering and related research activities for UPLB and IRRI researchers. The committee went on to draft a Philippine biosafety policy, which was submitted to the Office of the President. On October 15, 1990, recognizing the potential for modern biotechnology both in improving the lives of the people and in creating hazards if not handled properly, President Corazon C. Aquino issued Executive Order 430 creating the National Committee on Biosafety of the Philippines (NCBP) that will formulate, review and amend national policy on biosafety and formulate guidelines on the conduct of activities on genetic engineering. The NCBP is comprised of representative of the Departments of Agriculture (DA); Environment and Natural Resources (DENR); Health (DOH); and Science and Technology (DOST), 4 scientists in biology, environmental science, social science and physical science; and 2 respected members of the community. On July 16, 2001, President Gloria Macapagal-Arroyo issued the Policy Statement on Modern Biotechnology, reiterating the government policy on promoting the safe and responsible use of modern biotechnology. On April 3, 2002, Department of Agriculture Administrative Order No. 8, Series of 2002 was issued implementing the guidelines for importation and release into the environment of Plants and Plant Products Derived from the Use of Modern Biotechnology. On March 17, 2006, President Gloria Macapagal-Arroyo issued Executive Order No.514 Establishing the National Biosafety Framework, prescribing guidelines for its implementation, reorganizing the National Committee on Biosafety of the Philippines, and for other purposes. On December 8, 2015, the Philippine Supreme Court declared DA AO8 null and void and any application for contained use, field testing, propagation and commercialization, and importation of GMOs was temporarily enjoined. In response to the nullification of DA AO8, the Technical Working Group composed of representatives from the Departments of Agriculture (DA), Science and Technology (DOST), Environment and Natural Resources (DENR), Health (DOH), and Interior and Local Government (DILG) drafted the Joint Department Circular No. 1, Series of 2016 (JDC No.1, S2016) titled 'Rules and Regulations for the Research and Development, Handling and Use, Transboundary Movement, Release into the Environment, and Management of Genetically-Modified Plant and Plant Products Derived from the Use of Modern Biotechnology'. There were series of meeting and five public consultations conducted before the JDC No.1, S2016 was approved and signed by the Secretaries of the abovementioned agencies on March 7, 2016 and took effect on April 15, 2016. Under this Circular, more government agencies were involved such as the Department of Science and Technology (DOST) to regulate applications for contained use and confined test of regulated articles; Department of Agriculture (DA) to evaluate applications for field trial, commercial propagation and transboundary movement of regulated articles; Department of Environment and Natural Resources (DENR) to evaluate environmental risks and impacts of regulated articles; Department of Health (DOH) to evaluate of environmental health impacts of regulated articles; and Department of the Interior and Local Government (DILG) to supervise public consultation during field trial.
Useful links
Relevant documents
Stacked events: Gene stacking in plants can be conferred either through genetic engineering or conventional breeding A full risk assessment as to food and feed or for processing shall be conducted to plant products carrying stacked genes conferred through genetic engineering or conventional breeding, where the individual traits have no prior approval for direct use as food and feed or processing from the Bureau of Plant Industry (BPI) A desktop or documentary risk assessment on the possible or expected interactions between the genes shall be conducted for stacked gene products with multiple traits conferred through conventional breeding and individual events granted prior approval by the Bureau of Plant Industry.
Plant Products Carrying Stacked Genes Conferred Through (a) Genetic Engineering or b) Conventional Breeding, with Individual Traits That Have No Prior Approval:
A full risk assessnent as to food and feed or processing shall be conducted,consistent with Part V of AO No. 8,"Approval Process For the Importation of Regulated Articles for Direct Use as Food and Feed or For Processing for plant products with multiple traits conferred through:
(a) genetic engineering, or
(b) conventional breeding, where the individual traits have no prior approval from the Bureau of Plant Industry (BPI) for direct use as food and feed or processing.
Plant Products Carrying Stacked Genes Conferred through Conventional Breeding:
For plant products with multiple traits conferred through conventional breeding,with all individual events granted prior approval and included in the Approval Registry, a notlfication shall be submitted by the technology developer to the BPI, which shall conduct an evaluation in accordance with the relevant criteria in Annex I of this Memorandum Circular. The list of data contained in Annex I will not preclude the inclusion of other issues and concerns that will be raised by the BPI and the Scientific and Technical Review Panel (STRP) during the course of the desktop review.
Notificatlon Requirement for Plant Products Carrying Stacked Genes
All technology developers shall submit a notification to the Bureau of Plant Industry of their developed plant products carrying stacked genes and shall be required to comply with the relevant approval process listed above.
The Bureau of Plant Industry shall issue a certiflcate as to the approval of the stacked gene product and shall likewise include the transformation event in the official approval registry of plant products for food and feed or processing. Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: Bureau of Plant Industry 692 San Andres St, Malate, Manila 1004
| Name of product applicant: |
Syngenta Korea |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
24/06/2014 |
| Scope of authorization: |
Food and feed |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
Please see the link below(in Korean). |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Ministry of Food and Drug Safety
Contact person name:
Website:
Physical full address: Osong Health Technology Administration Complex, 187, Osongsaengmyeong 2-ro, Osong-eup, Cheongwon-gun, Chungcheonbuk-do, 363-700, Korea
Phone number: 82-43-719-2360
Fax number:
Country introduction:
Useful links
Relevant documents
Stacked events:
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant:
| Name of product applicant: |
Syngenta |
| Summary of application: |
|
| Upload: |
|
| Date of authorization: |
16/04/2021 |
| Scope of authorization: |
Food and feed |
| Links to the information on the same product in other databases maintained by relevant international organizations, as appropriate. (We recommend providing links to only those databases to which your country has officially contributed.): |
|
| Summary of the safety assessment (food safety): |
The GA21 x T25 (MON-ØØØ21-9 x ACS-ZMØØ3-2) stacked maize event was produced by conventional breeding of GA21 and T25 single events. The stacked maize event provides tolerance to glyphosate and glufosinate herbicides. Both the GA21 and T25 parent events have been previously approved in Singapore for food, feed and processing uses. Molecular analyses showed that the integrity of the transgenic inserts from each single event was preserved during the conventional breeding to produce the stacked maize event. The concentrations of mEPSPS and PAT in the stacked maize event were similar to those of the corresponding single events. Potential interactions between co-expressed mEPSPS and PAT proteins are extremely unlikely because of the limits imposed by the structure and function of each protein. The compositional analyses showed that the nutrient composition of forage and grain of the stacked maize event is similar to conventional maize. Food derived from GA21 x T25 stacked maize event is as safe as food derived from conventional maize varieties. |
| Upload: |
|
| Where detection method protocols and appropriate reference material (non-viable, or in certain circumstances, viable) suitable for low-level situation may be obtained: |
|
| Relevant links to documents and information prepared by the competent authority responsible for the safety assessment: |
|
| Upload: |
|
| Authorization expiration date (a blank field means there is no expiration date) |
|
E-mail:
Organization/agency name (Full name): Singapore Food Agency (SFA)
Contact person name: Dr Tan Yong Quan
Website:
Physical full address: 52 Jurong Gateway Road 14-01 JEM Office Tower Singapore 608550
Phone number: (65)68052750
Fax number:
Country introduction: The Singapore Food Agency (SFA) is a Statutory Board established under the Ministry of Sustainability and the Environment (MSE) to oversee food safety and security. SFA’s mission is to ensure and secure a supply of safe food. SFA adopts a risk-based approach to food safety. Foods with foodborne hazards that may pose potential food safety risks to consumers are subjected to more stringent checks, regardless of their country of origin. SFA has in place an integrated system to ensure that both imported and domestically produced foods are safe for consumption. The system comprises control measures such as source accreditation, inspection and surveillance of food, laboratory analysis, food legislation and recall of food products, which safeguard food safety from farm to fork. Useful links
Relevant documents
Stacked events:
Contact details of the competent authority(s) responsible for the safety assessment and the product applicant: Singapore Food Agency (SFA)
|
|
