Appendix 5
EQUIPMENT LISTS

A 5.1 EQUIPMENT ALREADY PURCHASED BY G.O.T. (1988)

Laboratory

1. Salinity/conductivity/temperature meter
2. Dissolved oxigen meter
3. Nansen
4. Oven
5. Microscope + stereomicroscope
6. pH meter
7. Analytical balance
8. Technical balance
9. Thermometer
10. Optical salinometer
11. Dryer
12. Plankton nets

General

1. Boat + engine
2. Ice box
3. Audio-visual equipment
4. Photocopy machine
5. Projector

A 5.2 ESTIMATED BUDGET FOR EQUIPMENT TO BE IMPORTED IN 1989
(based on 1988 prices)

A 5.3 OTHER EQUIPMENT TO BE PURCHASED LOCALLY 1st. YEAR (1989)

Hatchery + hatchery office

• Furniture
• Typewrites
• Homogenizer/grinder
• Miscellaneous

Laboratory

• Refrigerators
• Freezers
• Furniture
• Glass ware
• Chemical analysis kits
• Miscellaneous

Office/Didactic

• Telefax and telex
• Central telephone

Farm

• Vehicles
• Workshop equipment/tools
• Miscellaneous

A 5.4 SPECIFICATIONS FOR UNDP CONTRIBUTION EQUIPMENT

1. Computer (already purchased)

• IBM PS/60: No. 1
  or equivalent Olivetti IBM Compatible; 2 MB RAM; coloured monitor; hard disk 60 MB.
• Floppy 3 ½" 1.2 MB: No. 1
• Floppy 5" 360 KB: No. 1
• Extra serial interface 232: No. 1
• Printer EPSON LQ 1500 or equivalent: No. 1
• UCP 500 W (including stabilizer): No. 1
• Mouse serial microsoft: No. 1
• Modem with interface 350/1200 boud: No. 1
• Back-up unit 40 MB: No. 1

Software

• DOS 4.0: No. 1
• GW Basic: No. 1
• DBase 4: No. 1
• Word star 2000.3 or equivalent: No. 1
• Lotus: No. 1
• Data Com Pagage: No. 1

2. Mechanical filters

• Gravel filters: No. 2
  Vertical fiter
  turbidity reducing capacity: inferior to 5 NTU
  flow rate: minimum 25 m3/h
                  maximum 50 m3/h
  pressure: 1.5 to 7 atm
  head loss: 1 atm
  filtering minerals container: epoxy coated stainless steel automatic and manual backwash

• Diatom filters: No. 2
  AISI 304 stainless steel body; epoxy coated and PP
  Operating pressure:
  minimum: 1 atm
  maximum: 2.5 atm
  maximum flow: 20 m3/h
  Pressure control system equipped with self-cleaning candles carrying filtering material (diatom powder); made from stainless steel springs covered with PP stocking

• Dissolved oxygen probes YSI 5739: No. 4

• Probe cables YSI 5740–10 No. 4

• Probe service kits (membrane + KCE) YSI 5775: No. 2

• Spectrophotometer: No. 1
  Ciba-Corning (mod 259) or Pye Unicam
  Wavelenght range 330 – 900 nm; bandpass ±7nm; glass cell 10 mm path length and 40 mm path length autocell; wavelength accuracy ±2 nm

• Filtration equipment: No. 1
  Millipore
  Vacuum pump with manostat; filter holder

• Clinical centrifuge: No. 1
  Claudon (mod. T51 Micro)
  Carrier 8 × 15 ml; max. speed 4200 r.p.m.

• Furnace: No. 1
  Mod. EML 11/6
  Volume: 6.4 1; 220 – 240 V; max.temp. 1100 °C

• pH meter: No. 2
  WTW (mod. pH 196)
  Portable digital meter with automatic temperature compensation; direct measure of temperature and millivolts; 3 m probe cable.

• pH stick meter: No. 3
  Astell (mod. PMA 576)
  Automatic temperature compensation; splashproof membrane switching; range pH: 0 – 14; resolution: 0.01; accuracy: ± 0.02

• Temperature stick meter: No. 3
  Astell (mod. TMA 582)
  Range: -30 +150 °C; resolution: 0.1 °C; accuracy ±0.5 °C.

• Imhoff sedimentation system: No. 1
  Azlon (mod. SWX 006)
  Rectangular stand, 3 cones.

• Incubator: No. 1
  Astell Hearson (mod. JBH 000)
  Volume 180 l; temperature range, ambient 20 °C: -10 +50 °C; temperature fluctuation: ± 0.1 °C.

• Peristaltic pumps for HC10 injection: No. 2
  Complete of suction and injection kit
  Qmax = 27 l/h
  Pressure : 10 bar
  Accuracy : ± 4%
  Power: 380V; 50Hz; 60W
  PVC-head PTFE-membrane

• Spare parts
  Diatom powder for filters: kg 100
  sand filter filling material: No. 6

3. Pumps

• Centrifugal single stage vertical axis electropumps with cast iron bearing housing. All parts in contact with sea water must be of plastic (PVC; PP; PVDF…etc.), 3-phase motors 380 V/50 Hz IP 55 protection with following capacity:
  minimum 10 m3/h; head 9 m : No. 4
  minimum 45 m3/h; head 12 m : No. 6

• All-round transportable pumps: No. 6
  centrifugal submersible electropumps made entirely by polymers. Automatic level control (mercury switch); 3-phase motor; 380V/50Hz flow rate: 10 m3/h; head: 2–3 meters

4. Laboratory equipment

• Digital YSI oxygen meter: No. 2

  Sensing element: Clark type membrane covered polarographic electrode temperature compensated from ± 3% of D.O. readings from - 5 °C to 40 °C Range of measurement: oxygen 0–5; 0–10; 0–20 ppm; accuracy ± 0.1 ppm;
  temperature - 5 °C to 45 °C; accuracy ± 0.5 °C

• B.O.D. glass oxygen bottles: No. 50
  Babcock (mod. BJM 372)
  Capacity: 250 ml.

• Homogeniser: No. 1
  Azlon (mod. HWN 848)
  Potter sterilisable homogeniser; virgin p.t.f.e. piston and glass cylinder 15 ml capacity.

• Electronic balance: No. 1
  Mettler (mod. PM 3000)
  Weighing range: 3100 g; readability: 0.1 g; fully subtractive tare.

• Bacteriological incubator: No. 1
  Temp.: +25 +80 °C; accurancy: ±0.2 °C; vol.: ±200 l; power:
  220V, 50Hz; transparent door.

• Oven: No. 1
  Temp.: +40 +240 °C; accurancy: 1 – 2 °C; vol.: ±200 l; power:
  220V, 50Hz.

• Portable salinometer: No. 1
  Scale 0–45 ppt; division 1 ppt also with temperature compensation 0 to +30 °C

• Electronic thermometer: No. 4
  Scale -20 °C to +125 °C
  Precision 0.1 °C
  Display ½" LCD
  Platic probe with stainless steel terminal part and NPN microtransistor, complete with batteries.

• Optical refractometer (Salinometer): No. 2
  Aluminium: waterproof
  Scale: 0–45 ppt
  Division: 1 ppt
  Automatic temperature compensation 0 to 30° C

• Technical balance: No. 1
  Epoxy coated, electronic mechanical balance.
  Stainless steel or plastic plate
  Weighing range: 0.1–2200 g;
  Division: 0.01 g
  Measuring time: 2 seconds
  Automatic
  Power supply 220 V/50 Hz

• Refrigerated thermostat incubator: No. 1
  Electronic thermostat and digital thermometer forced air ventilation
  internal socket
  Temp.: -20° C +50° C, div 1/1
  Power: 220 V/50 Hz
  Inner neon lamps with timer electric heater
  Approx. ext. volume 0.6 m3

• Stereo microscope: No. 1
  Zoom binocular head
  inclination: 45°
  Eyepieces: interpupillary
  adjustment 10 ×; 20 ×
  Zoom objectives: from 0.7 to 2.4
  Illumination: transmitted and incident with built-in transformer for 6 V; 1.2 A

• Optical microscope: No. 1
  with high power definition
  Binocular head: 45° inclination, 360° rotation, locable at any angle.
  Eyepieces 5×; 10×; 14×
  Objectives: × 4; × 10; × 40; × 100 (oil)
  Illumination adjustable
  Intensity control: Tungsten-halogen low voltage lamp (10 W/6 V) and built-in transformer
  Focusing: macro and micrometric
  Stages: graduated low position coaxialmechanical stage with
  Vernier scales reading to 0.1 mm
  Condenser: ABBE, two lens type, NA Iris diaphragm and daylight blue filter.

A 5.5 QUOTATION FORMS

1. PUMPS (submerged)

Please report all inclusive amounts/give details-specifications-explanations in annex

Furthermore, offer must include also following:

4. DETAILED GARANTIES

   Please specify years of guarantee, precise terms of replacement of defective, broken or worn-out parts within time of guarantee, etc.

5. TIME OF INTERVENTION

   Please specify guaranteed maximum time of specialist intervention for restarting of pump(s) after breakdown.

6. SPARE PARTS

   Please give detailed list of spare parts available in own store and relative price list.

2. ELECTRIC GENERATORS

Furthermore, offer must include also following:

4. DETAILED GARANTIES

   Please specify years of guarantee, precise terms of replacement of defective, broken or worn-out parts within time of guarantee, etc.

5. TIME OF INTERVENTION

   Please specify guaranteed maximum time of specialist intervention for restarting of generator(s) after breakdown.

6. SPARE PARTS

   Please give detailed list of spare parts available in own store and relative price list.