APPENDIX XXII
PROPOSED DRAFT REVISED STANDARD FOR WHEY CHEESES
(at Step 5)
1. SCOPE
This Standard applies to all products intended for direct consumption or further processing, in conformity with the definition of whey cheeses in Section 2 of this Standard. Subject to the provisions of this Standard, Codex standards for individual varieties of whey cheeses may contain provisions which are more specific than those in this Standard.
2. DESCRIPTION
2.1 Whey Cheeses are solid, semi-solid, or soft products which are principally obtained through either of the following processes:
(1) the concentration of whey and the moulding of the concentrated product;
(2) the coagulation of whey by heat with or without the addition of acid .
In each case, the whey may be pre-concentrated prior to the further concentration of whey or coagulation of the whey proteins. The process may also include the addition of milk, cream, or other raw materials of milk origin before or after concentration or coagulation. [The ratio of whey protein to casein in the product obtained through the coagulation of whey shall exceed that of milk.]
The product obtained through the coagulation of whey may either be ripened or unripened.
2.2 Whey Cheese obtained through the concentration of whey is produced by heat evaporation of whey, or a mixture of whey and milk, cream, or other raw materials of milk origin, to a concentration enabling the final cheese to obtain a stable shape. Due to their relatively high lactose content these cheeses are typically yellowish to brown in colour and possess a sweet, cooked, or caramelized flavour.
2.3 Whey Cheese obtained through the coagulation of whey is produced by heat precipitation of whey, or a mixture of whey and milk or cream, with or without the addition of acid. These whey cheeses have a relatively low lactose content and a white to yellowish colour.
3. ESSENTIAL COMPOSITION AND QUALITY FACTORS
3.1 Raw Materials
(1) For products obtained through the concentration of whey:-
whey, cream, milk and other raw materials obtained from milk.
(2) For products obtained through the co-agulation of whey:-
whey, milk, cream and buttermilk
3.2 Permitted Ingredients
Only for use in products obtained by coagulation of whey:
- Sodium chloride
- Starter cultures of harmless lactic acid bacteria
4. FOOD ADDITIVES
Only those food additives listed below may be used for products obtained through the concentration of whey and only within the limits specified.

Only those food additives listed below may be used for products obtained through the coagulation of whey and only within the limits specified.

5. CONTAMINANTS
The products covered by this Standard shall comply with the maximum limits for contaminants and the maximum residue limits for pesticides and veterinary drugs established by the Codex Alimentarius Commission..
6. HYGIENE
6.1 It is recommended that the products covered by the provisions of this standard be prepared and handled in accordance with the appropriate Sections of the Recommended International Code of Practice – General Principles of Food Hygiene (CAC/RCP 1-1969, Rev.4-2003), and other relevant Codex texts such as Codes of Hygienic Practice and Codes of Practice.
6.2 From raw material production to the point of consumption, the products covered by this standard should be subject to a combination of control measures, which may include, for example, pasteurization, and these should be shown to achieve the appropriate level of public health protection.
6.3 The products should comply with any microbiological criteria established in accordance with the Principles for the Establishment and Application of Microbiological Criteria for Foods (CAC/GL 21-1997).
7. LABELLING
In addition to the provisions of the Codex General Standard for the Labelling of Prepackaged Foods (CODEX STAN 1-1985, Rev.1-1991) and the General Standard for the Use of Dairy Terms (CODEX STAN 206-1999), the following specific provisions apply:
7.1 Name of the Food
The name of the food shall be whey cheese. Where it is considered necessary for consumer information in the country of sale, a description of the nature of the product may be required. The words “whey cheese” may be omitted in the designation of an individual whey cheese variety reserved by a Codex standard for individual cheeses, and, in the absence thereof, a variety name specified in the national legislation of the country in which the product is sold, provided that the omission does not create an erroneous impression regarding the character of the food.
In case a whey cheese obtained through the co-agulation of whey is not designated by a variety name, but with the designation “whey cheese”, the designation may be accompanied by a descriptive term such as provided for in Section 7.1.1 of the Codex General Standard for Cheese (CODEX STAN A-6, Rev. 1-1999).
Unripened whey cheese obtained through the concentration of whey may be designated according to the fat content as provided in Section 7.2.
7.2 Declaration of Milk Fat Content
The milk fat content shall be declared in a manner found acceptable in the country of sale to the final consumer, either (i) as a percentage by mass, (ii) as a percentage of fat in dry matter, or (iii) in grams per serving as quantified in the label provided that the number of servings is stated.
For cheeses obtained from the concentration of whey, the declaration of milk fat content may be combined with an indication of the fat content as follows:

Fat on the dry basis¹

Creamed whey cheese minimum 33%
Whey cheese minimum 10% and less than 33%
Skimmed whey cheese less than 10%
7.3 Labelling of Non-Retail Containers
Information required in Section 7 of this Standard and Sections 4.1 to 4.8 of the General Standard for the Labelling of Prepackaged Foods (CODEX STAN 1-1985, Rev.1-1991), and, if necessary, storage instructions, shall be given either on the container or in accompanying documents, except that the name of the product, lot identification, and the name and address of the manufacturer or packer shall appear on the container. However, lot identification, and the name and address of the manufacturer or packer may be replaced by an identification mark, provided that such a mark is clearly identifiable with the accompanying documents.
8. METHODS OF SAMPLING AND ANALYSIS
See Codex Alimentarius, Volume 13.

¹ The dry matter content of whey cheese includes water of crystallization of the lactose.