16 List of Photos
Photo 1:
Cross section of coconut palm stem at breast height
Photo 2:
Low-cost house
Photo 3:
Handplaning of coconut beam for low-cost house construction
Photo 4:
Coconut pavilion roofed with coconut shingles
Photo 5:
Roof construction of coconut chapel in Davao, Philippines
Photo 6:
Bungalow with coconut wood - the pillars are hollow cylinders
Photo 7:
Detail of wall with bricks made of coconut sawdust and wall-panelling
Photo 8:
Details of coconut wood house (window frames)
Photo 9:
Turned balusters
Photo 10:
Chair
Photo 11:
Laminated table-top
Photo 12:
Briefcase
Photo 13:
Dining-room table and chairs (Pacific Green, Fiji)
Photo 14:
Coconut wood - upholstered furniture (Pacific Green, Fiji)
Photo 15:
Living-room furniture and accessories (Pacific Green, Fiji)
Photo 16:
Coconut palm wood furniture exhibited at International Furniture Fair in Cologne, 1994
Photo 17:
Coconut palm wood furniture exhibited at International Furniture Fair in Cologne, 1994
Photo 18:
Tool handles
Photo 19:
CCA-treated fence post
Photo 20:
CCA-treated power pole
Photo 21:
Fungal attack on untreated power pole
Photo 22:
Crates
Photo 23:
Laminated and bolted coconut boards
Photo 24:
Laminated roof trusses joined by a nail plate
Photo 25:
I-beam with plywood webbing
Photo 26:
Laminated and bolted roof construction
Photo 27:
Coconut palm stems after toppling
Photo 28:
Manual ramp-loading of palm logs
Photo 29:
Chain-sawing of palm stems
Photo 30:
Chain-sawing of palm stems with guide bar
Photo 31:
Circular saw headrig (note the wide gullets in saw-blade)
Photo 32:
Band-saw
Photo 33:
Frame-saw (infeed)
Photo 34:
Frame-saw (outfeed)
Photo 35:
Frame-saw blade
Photo 36:
Band-saw blade grinder
Photo 37:
Sawdust accumulation under circular saw
Photo 38:
Coconut sawn timber laid out for visual grading
Photo 39:
Stacked coconut boards (note fungus-infected board, second from right)
Photo 40:
Coconut sawn timber stacks in the open (uncovered)
Photo 41:
Sawn timber sheds
Photo 42:
Dip treatment of coconut boards
Photo 43:
Hot and cold bath
Photo 44:
Pressure plant
Photo 45a:
Solid (one-piece) saw-blade
Photo 45b:
TCT-saw-blade
Photo 46:
Dimension saw (sliding table saw)
Photo 47:
Narrow band-sawing machine
Photo 48:
Four-side planing/moulding machine
Photo 49:
Cutter with cutting tips of stellite or TC
Photo 50:
TC-tipped shank type cutter for router
Photo 51:
Profile cutter head with exchangeable knives
Photo 52:
Spindle shaper/moulder
Photo 53:
End-face planing machine
Photo 54:
Boring machine with swivellable boring head
Photo 55:
Profile sanding tool
Photo 56:
Operating principle of dovetailing
Photo 57:
Charcoal kiln "mark V"
Photo 58:
Table-top made of various coloured woods incl. coconut palm wood